新利18体育下载官网
资讯
联系我们
全国服务热线:
18765894567
- 地址：
- 济南市市中区经十西路
- 邮箱：
- 249058066@qq.com
- 电话：
- 18765894567
- 传真：
- 18765894567
新闻资讯
当前位置：首页>新利18体育下载官网>新闻资讯各类危险货物装集装箱的要求
各类危险货物装集装箱的要求
来源：//www.arapidia.com时间：2023-03-02
A、爆炸品
A. Explosives
爆炸品应按配装类的要求进行装箱。
Explosives shall be packed according to the requirements of the packing category.
雷管及引信等敏感的物质应装于货物的表面。
Sensitive substances such as detonators and fuses shall be loaded on the surface of the goods.
济南集装箱内的地面应为木质结构或是将货物装载在密合的格板、木质托盘垫上。如包装与箱体之间可能因摩擦、碰撞等产生火花、静电，应在箱壁四周使用木板或其他等效衬垫与其隔离。
The ground inside the Jinan container shall be of wooden structure or the goods shall be loaded on a closed grid or wooden pallet pad. If sparks and static electricity may be generated between the package and the box due to friction and collision, wooden boards or other equivalent gaskets shall be used around the box wall to isolate it.
进行箱内系固作业时，应使用防火花的工具，防止撞击、震动和用力过猛，使用的钉子不应撒落在箱内。
During the fastening operation in the box, the flameproof tools shall be used to prevent impact, vibration and excessive force. The nails used shall not be scattered in the box.
B、气体
B. Gas
1、不应使用箱内沾有油污的集装箱。
1. Containers contaminated with oil shall not be used.
2、应穿沾有油污的工作服和使用沾有油污的手套进行作业。
2. Wear working clothes and gloves stained with oil for operation.
3、钢瓶应符合下列要求
3. The steel cylinder shall meet the following requirements
帽应拧紧，无异味。瓶帽如有松动，应采取有效的紧固措施。瓶壁无腐蚀、无凹陷及损坏现象。其他件(如阀门、瓶体、漆色)应符合产品标准。钢瓶的保护皮圈应齐全。
The safety helmet shall be tightened without peculiar smell. If the bottle cap is loose, effective fastening measures shall be taken. The bottle wall shall be free of corrosion, depression and damage. Other parts (such as valve, bottle body and paint color) shall comply with product standards. The protective leather ring of steel cylinder shall be complete.
4、作业时不应手持钢瓶的帽，不应抛掷、碰撞、滚滑。
4. During operation, the safety helmet of steel cylinder shall not be held, and it shall not be thrown, collided or rolled.
5、钢瓶应以托盘或成组形式装箱，防止钢瓶在箱内滚动。箱壁和两端应用木板隔离。
5. Steel cylinders shall be packed in pallets or groups to prevent them from rolling in the box. The box wall and both ends shall be separated by wooden boards.
6、堆放时，箱内钢瓶的帽朝向应保持一致。
6. During stacking, the orientation of safety helmet of steel cylinders in the box shall be consistent.
C、易燃液体
C. Flammable liquid
1、桶类包装，应符合下列要求：桶盖无松动现象，焊缝无渗漏痕迹。桶端无膨胀或外裂现象。
1. The barrel packaging shall meet the following requirements: the barrel cover shall be free of looseness, and the weld shall be free of leakage. There is no expansion or external crack at the barrel end.
2、闭杯闪点在-18℃以下的易燃液体装箱时，集装箱箱壁四周应用木板衬垫。
2. When the flammable liquid with the closed cup flash point below - 18 ℃ is packed, the container wall shall be padded with wood.
3、桶装货装箱后有空隙的，应有效的加固，防止移动。
3. If there are gaps after the barreled goods are packed, they should be effectively reinforced to prevent movement.
4、货物加固时，不应使用易产生火花的工具。
4. When goods are reinforced, tools that are easy to produce sparks shall not be used.
D、易燃固体、易于自燃的物质、遇水放出易燃气体的物质
D. Flammable solids, substances that are prone to spontaneous combustion, and substances that emit flammable gases in contact with water
1、装有电石、黄磷等的桶类包装两端应无膨胀现象。
1. There shall be no expansion at both ends of the barrel package containing calcium carbide, yellow phosphorus, etc.
2、包件应无潮湿、水渍、油污现象。
2. The package shall be free of moisture, water stain and oil stain.
3、装载遇水放出易燃气体物质的集装箱箱内不应潮湿，应保持干燥。
3. Containers containing flammable gas substances released from water should not be wet and should be kept dry.
总之，装箱过程中注意核对所装危险货物是否与装箱单据相符。同时切记做好人员防护基础上再考虑其他问题，毕竟生命为上，更多相关集装箱使用的事项就来我们网站
//www.arapidia.com咨询吧！
In short, during the packing process, pay attention to check whether the loaded dangerous goods are consistent with the packing documents. At the same time, remember to do a good job of personnel protection before considering other issues. After all, life is paramount. More matters related to the use of containers will come to our website //www.arapidia.com Ask!
