How to solve the problem of anti-corrosion and heat insulation for living containers?

类似新利18的体育平台 在很多城市都是年轻人热衷于选择的一个居住场所，毕竟内部空间自由发挥，还便宜。但是冬暖夏凉、风霜雨雪的敲打，总会造成一定的困扰，即便是空调或者降温器等等，也无法阻止夏季集装箱内部的高温作祟，还有长期使用下来的把腐蚀情况。那么对于出租的集装箱，厂家一般会采取什么办法对其机型防腐蚀。隔热工作呢？下面一起来看下吧。

In many cities, living container is a place that young people are keen to choose. After all, the internal space is free and the price is cheap. However, the impact of warm winter and cool summer, wind, frost, rain and snow will always cause certain problems. Even the air conditioner or cooler can not prevent the high temperature inside the container in summer, and the corrosion of the container after long-term use. So for rental containers, manufacturers will generally take what measures to its model corrosion. What about insulation? Let's take a look.

1、热浸锌

1. Hot dip galvanizing

（1）热浸锌生产工业化程度高，耐久年限长，其质量稳定。所以，大量的用于受大气腐蚀较严重、且不易维修的室外钢结构中。

(1) Hot dip galvanizing has high industrialization, long durability and stable quality. Therefore, a large number of them are used in outdoor steel structures which are seriously corroded by the atmosphere and difficult to maintain.

（2）近年来，大量出现的轻钢结构体系中的压型钢板等，也较多采用热浸锌防腐蚀。热浸锌的工序是酸洗除锈、然后是清洗。

(2) In recent years, a large number of light steel structure system, such as profiled steel sheet, also use hot-dip galvanizing corrosion protection. Hot dip galvanizing process is pickling rust, and then cleaning.

（2）对于钢结构设计者，应该避免设计出具有相贴合面的构件。以免贴合面的缝隙中，酸洗不干净或酸液洗不净，造成镀锌表面流黄水的现象。热浸锌是在高温下进行的。

(2) For the steel structure designer, it should be avoided to design the components with the interface. So as to avoid the phenomenon of yellow water flowing on the galvanized surface due to unclean pickling or acid washing in the joint surface. Hot dip galvanizing is carried out at high temperature.

2、涂层法

2. Coating method

（1）涂层依赖于除锈，常用的氟碳涂料，防腐年限甚长达50年。所以，用于室内钢结构、或相对易于维护的室外钢结构较多。它一次成本低，但用于户外时维护成本较高。涂层法的施工的步是除锈。所以，要求高的涂层一般多用喷砂喷丸除锈，露出金属的光泽，除去所有的锈迹和油污。

(1) Coating depends on derusting, commonly used fluorocarbon coating, anti-corrosion life even as long as 50 years. Therefore, there are many indoor steel structures or outdoor steel structures which are relatively easy to maintain. It has low cost at one time, but high maintenance cost when used outdoors. The first step of coating method is to remove rust. Therefore, the coating with high requirements is usually rust removed by sand blasting to expose the luster of metal and remove all rust and oil stains.

（2）现场施工的涂层可用手工除锈。涂层的选择要考虑周围的环境，不同的涂层对不同的腐蚀条件、有不同的耐受性。涂层的施工要有适当的温度、湿度，涂层的施工环境粉尘要少，构件表面不能有结露。涂装后4小时之内不得淋雨，涂层一般做4、5遍。在海边或海上或是在有强烈腐蚀性的大气中，干漆膜总厚度可加厚。

(2) The coating applied on site can be removed by hand. The selection of coating should consider the surrounding environment. Different coatings have different resistance to different corrosion conditions. The coating construction should have proper temperature and humidity, the dust in the coating construction environment should be less, and there should be no condensation on the surface of components. No rain is allowed within 4 hours after coating, and the coating is generally made for 4 or 5 times. The total thickness of dry paint film can be increased by the sea or at sea or in the atmosphere with strong corrosivity.