新利18体育下载官网
    资讯
    联系我们
    全国服务热线:
    18765894567
    地址:
    济南市市中区经十西路
    邮箱:
    249058066@qq.com
    电话:
    18765894567
    传真:
    18765894567
    技术资讯 当前位置:首页>新利18体育下载官网>技术资讯仓库式集装箱的使用特点
    仓库式集装箱的使用特点 来源://www.arapidia.com时间:2021-12-21
    仓库式集装箱具有移动方便、污染小、针对不同用户的需求设计生产不同的规格(指单位空间的大小)及多次重复使用等特点,报废后还可作为废旧钢材回收再利用,因而受到广泛欢迎。
    Warehouse containers have the characteristics of convenient movement, low pollution, design and production of different specifications (referring to the size of unit space) according to the needs of different users and repeated use. After scrapping, they can also be recycled as waste steel, so they are widely welcomed.
    2结构特点
    2. Structural features
    仓库式集装箱按照标准集装箱的外形尺寸设计生产,根据用户要求分隔成不同数量的空间,1个20英尺集装箱可分隔为12个单位空间,每个空间的大小约为3。
    Warehouse containers are designed and produced according to the overall dimensions of standard containers. They are divided into different quantities of spaces according to user requirements. A 20 foot container can be divided into 12 unit spaces, and the size of each space is about 3.
    地震多发国和地区对仓库式集装箱有抗震要求,故主体柜架采用型钢设计,四角立柱采用4.0(4.5)mm×150 mm×150 mm方管,其他侧梁采用4.0 mm×100 mm×150 mm方管。四角立柱的端板采用或以上厚度的厚板,其中间孔按标准集装箱角件孔的位置及尺寸进行设计。端板带有手柄,手柄上可配钻2个直径不小于的孔。在堆放23层集装箱时,此孔可用于集装箱与地面及上下层集装箱之间的连接,连接方式比较简单,立柱侧面上下各设计2个与标准角件位置及尺寸相同的孔。
    济南类似新利18的体育平台
    Earthquake prone countries and regions have seismic requirements for warehouse containers, so the main cabinet frame adopts section steel design, and the four corner columns adopt 4.0 (4.5) mm × 150 mm × 150 mm square pipe, 4.0 mm for other side beams × 100 mm × 150 mm square pipe. The end plate of the four corner column shall be a thick plate with a thickness of or above, and the intermediate hole shall be designed according to the position and size of the corner hole of the standard container. The end plate is equipped with a handle, which can be equipped with two holes with a diameter of no less than. When stacking 2-3 layers of containers, this hole can be used for the connection between the container and the ground and the upper and lower containers. The connection method is relatively simple. Two holes with the same position and size as the standard corner pieces are designed at the upper and lower sides of the column.
    仓库式集装箱的箱门可分为卷帘门、带门杆门封胶条式铁门、防盗门等不同型式。考虑到风力较大时卷帘门可能发出较大的噪声,可选用静音卷帘门,即在卷帘导轨内侧加装胶条,从而减小噪声。
    The door of warehouse container can be divided into rolling shutter door, door sealing rubber strip iron door with door rod, anti-theft door and so on. Considering that the rolling shutter door may make a large noise when the wind is strong, the silent rolling shutter door can be selected, that is, a rubber strip is installed on the inner side of the rolling shutter guide rail to reduce the noise.
    仓库式集装箱一般不承受重载,故可采用厚的木地板,顶板、侧板及端板等可采用厚的钢板,门间立柱可采用或以下厚度的钢板,底横梁可选用3.0厚的钢板,从而减少材料成本。
    Warehouse containers generally do not bear heavy loads, so thick wooden floors can be used, thick steel plates can be used for top plate, side plate and end plate, steel plates with or less thickness can be used for columns between doors, and 3.0 thick steel plates can be used for bottom beams, so as to reduce material costs.
    我们一直在坚持分享的路上 济南类似新利18的体育平台 //www.arapidia.com真正为您您所需要的问题.
    We have been insisting on sharing on the way to Jinan //www.arapidia.com Truly solve the problems you need
    Baidu
    map